
Residential setup says winterize after 12 hours below 32°F; warranty wording requires draining at/below freezing for any period. Ask for model-specific written reconciliation rather than choosing a permissive instruction.
A manufacturer-listed residential all-in-one chilled-water unit.

Outer dimensions as published by Plunge, drawn to scale.Maker's claimPlunge · read Sep 22, 2026
Current documents
Values describe the Plunge All-In Gen 2 on the cited date. Confirm options and delivered terms.
The buyer question
This configuration is designated for residential use by the manufacturer.
76-3/4 in L × 31-1/2 in W × 28-3/4 in HMaker's claimPlunge · read Sep 22, 2026
Electrical documents conflict: the product page says dedicated 120V/15A, while the Residential All-In setup guide says dedicated 120V/20A and does not identify Gen 2. Confirm the exact delivered unit's circuit requirement before purchase.
Clearance
The Residential All-In setup guide, which does not identify Gen 2, says at least 16 inches at the component end for ventilation, at least 12 inches at the front for drain access and ventilation, and 4 inches on the LED Display's left side. It recommends around 4 inches at the other end so you can lean your head back; that recommendation is not a stated ventilation or access minimum. Correction, October 19, 2026: our earlier note called the recommendation a side/end clearance requirement.
Maker's claimPlunge: Residential All-In setup (electrical and clearance re-read) · read Oct 15, 2026
After delivery
Installation, maintenance and repair can change the value of the purchase.

Residential setup says winterize after 12 hours below 32°F; warranty wording requires draining at/below freezing for any period. Ask for model-specific written reconciliation rather than choosing a permissive instruction.
The product page says "31% faster cooling using 50% less energy", "31% faster and 50% more energy-efficient cooling" and "50% more energy efficient". A product image headed "All-In Gen 2 features" says "50% more efficient than Gen 1". Only the image names a comparison, and the page gives no test conditions for any of these figures. Earlier reading, September 28, 2026: the image then on the page said "50% more efficient than Gen2".
Included in-home delivery is zone-dependent and does not include setup; extended-zone charges require address-specific confirmation.

Covered parts/labor are free, but access, mileage, removal/reinstallation and replacement delivery costs may fall to the owner; no fixed repair turnaround stated.
App/firmware, filter replacement at least every 30 days, water chemistry and winterization are coverage conditions; the text also prohibits adding ice.

The product page says a dedicated 120V/15A circuit, while the Residential All-In setup guide says dedicated 120V/20A and does not identify Gen 2. Confirm the requirement for the delivered unit. Correction, October 19, 2026: our earlier model record selected a 15A circuit.
Use your actual quote for the Plunge All-In Gen 2 and your site costs; unknown running expenses stay unknown.
Terms shown are current as of Sep 22, 2026; your purchase documents govern your order.
Perspective & limits
A supplied-unit review describes short-term use of an All-In, but its generation is unresolved. It does not establish Gen 2 durability.
Before you buy
Sources
Current document review, September 22, 2026. Manufacturer specifications are claims, not independent tests. Outside accounts are individual and generation-limited. How we research
Spot something wrong?
How corrections work